How To: Cable Flag – Brother P-Touch E550W


Video not playing? Click here!

In case you missed it, here is a step by step guide from the video:

  1. First make sure you are using a TZe FX tape as these will perform better in the long run.
  2. Press the flag button to choose this type of wire marking.
  3. Using the arrow buttons to navigate, change the layout, flag length, cable diameter and orientation.
  4. If you set the layout to be [AA|AA], the data you enter will appear the same on both sides of the flag.
  5. If you set the layout to be different [AA|BB], then you will get two columns for the unique data.
  6. Use the arrow buttons to navigate between columns.
  7. Press the print button to print the label. The printer will also cut it the correct size as well as printing a dotted line for where to position the label on the cable.

Share this helpful post

"How To: Cable Flag – Brother P-Touch E550W" by @labelzone

Tweet Close